En Bg Contacts

Date: December 2015

Products

ITALVARNISH HARD

Summary: Italvarnish Hard is one component waterborne acrylic lacquer. It forms a moisture resistant, durable, long-lasting aesthetic finish with a silky-matt or semi-matt shine on the treated surface.

SDS TDS

Appearance and Composition

The base lacquer is a white dispersion. After drying it becomes plexiglass transparent. It is colored on request.
Appearance of the coating: - uniform matt, semi matt or glossy (70%) surface.
Color: The base lacquer has a slight wheat hue.

Product Benefits

Water-based varnish dries rapidly in conditions of low humidity and at a suitable temperature, but to achieve maximum strength it needs some time. Since the lacquer is intended exclusively for furniture, it is recommended for two weeks not to place heavy objects and hot pots on the freshly coated tables. If the freshly lacquered doors exert very strong pressure on the desks, it is desirable to wait a longer time to maximize the formation of the coating film. The mounted sealants should not create problems with improper bonding. When choosing a lacquer note, that if the surface has defects, the glossy coating makes them more visible. To achieve a visual effect of greater thickness and deeper colors of the coating, apply a dark bottom layer of tinted lacquer and overlay the final coat with colorless or slightly tinted one.
Product features: Thixotropic, waterborne lacquer with very good wetting properties. The film is very clear. Fast drying and easy to apply also in vertical position. Gas-permeable.


Supplier: Rust LLC.

Product Usage

Recommended uses:It is used mainly for finishing coat. Suitable for decorative and industrial applications, chairs, furniture, doors, moldings and others.
Gloss group: Gloss 70% and Semi-matt.
Recommended spreading amounts (unthinned): Dry: 24-36 µm, wet 80-120 g/m², theoretical coverage 8-13 m²/l. Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Thinning: Application viscosity can be reached with approximately 0-10 % of thinning by volume with water, but not more.
Application method: Airless spraying, air-assisted airless spraying /nozzle 0.011"-0.015"/ and conventional spraying /nozzle 1.4-1.8 mm/.
Drying: air drying.
Drying time: 20-40 min by best conditions.
Density: 1.0 kg/l. The working viscosity can be obtained by dilution with water, from 0 to 10% by volume, but not more.
Best working conditions: Temperature of the surface above 18°C, humidity of the air below 70%. Above 80% humidity the drying slows significantly.
Температура на съхранение: It is recommended to use multi-stage drying under artificial conditions. In case of lack of such - from 5 to 35 °C
Storage temperature: 5 - 35°C. Do not go outside of this temperature range!
Shelf life in original container under the recommended conditions: Up to 6 months from production date.

Picture »