Air drying, waterborne, one component acrylate filler/primer for wooden surfaces.
Usable for intermediate coats.
Main application - for intermediate coat of indoor and outdoor furniture.
The primer is elastic.
The filler dries quickly and has very good sandability. Water dilutable and moisture regulating. Intended for building elements made of hard and softwood. The product has medium filling properties. For high filling properties refer to our productlist. Can be overcoated with waterborne paints and laquers. Can be applied in wet film thickness up to 200 µm.
Airless spraying, air-assisted airless spraying and conventional spraying for products with lower viscosity.
The outdoor furniture should be previously impregnated with a wood preservative. The surface must be very clean and free of dust and any contaminants. The moisture in soft wood should not exceed 15%, in-hard wood-12%. Use nozzle 0.279 mm = 0.011 inch or 0.33 mm = 0.013 inch with a spraying pressure of 70-90 bar.
Best working conditions:
Temperature of the surface above 18°C, relative humidity of the air below 70%, product temperature +15 - +20°C. Ensure good venitlation. Before use stir thoroughly.
Do not apply at direct sunlight and temperatures below +10 - +15°C, or above +30°C. Make sure that there is no dust in the air, the ventilation must be sufficient. Dark discoloration may appear on oak. Test the compatibility with trial spraying. Do not inhale the dust.
Drying time: Dust dry: less than. 30 minutes Touch dry: less than. 1 hour Ready for sanding: less than. 1 hour Coatable: after approx. 4 hours The drying times given are indicative.
Tools and cleaning:
Clean tools/equipment immediately after use with water and detergent. Any remains should not be released in the environment. Do not allow to get into the sewage system. Dispose according to the local legislation.
If necessary, thin with deionized water (max. 10%).
Up to 6 months from production date, store in well closed, original containers, at temperatures +5 - +35°C. Keep away from direct sunlight and sources of heat.
Acrylate dispersion, glycols, talculin Z, flow and leveling additives.
Specifications: Solids: colourless: approx. 35 % white: approx. 45 % Density: colourless: approx. 1.01 g/cm³ at +20°C white: approx. 1.3 g/cm³ at +20°C Viscosity: approx. 3500 mPa s at +20°C Solid content: approx. 42% Colour: slightly opalescent Packaging: 20 l tin containers, 200 plastic drum
Refer product SDS.