A waterborne, one component acrylate lacquer for wooden surfaces.
Usable for intermediate and finishing coats.
Main application - for furniture, exposed to weather conditions /external enviroments/.
High permanent elasticity and a long-term protection against weathering. Water dilutable, moisture regulating and fast drying, with a long-term UV protection.
Intended for building elements made of hard and softwood, such as windows, exterior doors and boardings.
Airless spraying, air-assisted airless spraying and conventional spraying for products with lower viscosity.
The wood should be previously impregnated with a wood preservative and treated with primer. The surface must be very clean and free of dust and any contaminants. The moisture in soft wood should not exceed 15%, in-hard wood-12%. Use nozzle 0.279 mm = 0.011 inch or 0.33 mm = 0.013 inch with a spraying pressure of 70-90 bar.
Best working conditions:
Temperature of the surface above 18°C, relative humidity of the air below 70%, product temperature +15 - +20°C. Test the compatibility with trial spraying.
Do not apply at direct sunlight and temperatures below +10 - +15°C, or above +30°C. Make sure that there is no dust in the air, the ventilation must be sufficient. Check that the sealing materials are compatible with the coating. Gaskets with plasticisers tend to stick to dispersion varnishes, so use plasticiser-free gaskets. Dark discoloration may appear on oak. Preliminary testing is recommended. ItalVarnish Elasta colourless may not be used outdoors.
Tools and cleaning:
Clean tools/equipment immediately after use with water and detergent. Any remains should not be released in the environment. Do not allow to get into the sewage system. Dispose according to the local legislation.
Recommended spreading amounts (unthinned): Consumption rate: approx. 150-300 ml/m² Wet film thickness: approx. 150-300 µm Dry film thickness: approx. 50-100 µm
Drying: Dust dry: after approx. 30 minutes Touch dry: after approx. 1 hour Coatable: after approx. 4 hours
If necessary, thin with deionized water (max. 10%).
Up to 6 months from production date, store in well closed, original containers, at temperatures +5 - +35°C. Keep away from direct sunlight and sources of heat.
Acrylate dispersion, glycols, UV-protection additives, flow and leveling additives.
Specifications: Density: approx. 1.05 g/cm³ at +20°C Viscosity: approx. 3500 mPa s at +20°C Solid content: approx. 35% Packaging: 20 l tin containers, 200 plastic drum
Refer product SDS.