En Bg Contacts

Date: December 2015



Summary: This is a multipurpose lithium grease, designed for lubrication of bearings, joints and other friction mechanisms operating at high pressure and fast revs. Its operating temperature is from -20°C to + 120°C (+ 130°C). The shelf life is 5 years. It is manufactured with penetration NLGI 1, 2 and 3 in packages of 0,4; 0,8; 3; 9; 15 kg and 180 kg drum.

SDS TDS Brochure 1 Brochure 2

Appearance and composition

Miscibility with other greases.

About the lithium grease UNIEL applies the same as for L24. Both are currently manufactured by the same formulation. The separation is done for convenience. L24 is manufactured ONLY with penetration NLGI 3, until UNIEL is manufactured mainly with penetration NLGI 2, but could be manufactured with penetration 1 or 3 too. UNIEL is a soft lubricant with yellow to light brown color. It is manufactured of medium-viscosity mineral base oil SN 600, thickened with lithium soap of 12-hydroxystearic acid. A viscosity modifier is added, that improves the colloidal stability, the plasticity of lubricants, the adhesion and the water resistance.

Product Benefits

It is characterized by its high dropping point temperature, high shear strength and good oxidative stability due to the use of antioxidants. The volatility of the oil is low. It has a high colloidal, mechanical and chemical stability and does not harden when heated. Uniel has a good water resistance, but it can not be compared with the calcium and aluminum grease. Its antiwear and antiseizure properties are satisfactory.

Supplier: Rust LLC.

Product Usage

The main purpose of the lubricant is to reduce the wear of the friction surfaces and thus to extend the life of machines and mechanisms. Along with this it performs other functions too. In some cases, besides reducing wear, it optimizes them, preventing seizure, nagging or jamming of the friction surfaces. It can be used in friction units from nearly all types: rolling and plain bearings, joints, gears, friction surfaces of wheeled and tracked vehicles, industrial mechanisms, electrical machinery, and etc., operating at high load and revs. Thanks to the anti-friction properties, it significantly reduces the energy losses due to the friction, which allows to increase the performance ratio of the machines and mechanisms. The lubricant has some corrosion protective properties, without being heavy-duty conservation and preservation lubricant by its nature. It hinders penetration to the friction surfaces of aggressive liquids, gases, vapors and also abrasive particles (dust, dirt, etc.). It should be noted, that there is a good effect by using of UNIEL only in enough quality units and devices. In rough, unprotected of water penetration and contamination subassemblies the use of high-quality Uniel is meaningless.
Operating temperature from -20°C to 120 (130)°C.
Storage and transportation: According to the Safety Rules for mineral oils and the rules for environmental protection. A product should be stored indoors, protected from direct sunlight and moisture.
Shelf life in original container under the recommended conditions: 5 years.
Recommended storage temperature: from -5°C to + 40°C.

A picture of packages »